broadsides Meccano

Bob's Meccano Articles

 

Three Switches For Meccano

SW1 SW2
2.00 each 2.25 each

ON/OFF

This switch has two toggle positions and is primarily used as a ON/OFF switch.

FORWARD/REVERSE

This switch has two toggle positions and is primarily used as a forward - reverse switch for a motor

SW3 SW4
2.50 each 2.00 each

FORWARD/STOP/REVERSE

This switch has three toggle positions and is primarily used as a forward - reverse switch for a motor, but has a central off position.

ONE OF TWO CIRCUIT SELECTOR

This switch has three toggle positions and is primarily used as a one of two circuit selector switch, it has a central off position where neither circuit is selected.

All switches have a panel cutout fixing of 6.5mm (1/4") diameter, two Meccano spaced fixing holes and the dimensions LxWxH are 38mm x 25mm x 32mm (1 1/2" x 1" x 1 1/4"). The maximum current is 5amps at 28volts D.C. For further information see the following leaflet available here.